Pre-Owned - (2) Neewer CTR-16 receivers (1) Godox CT-16 transmitter

Pre-Owned - (2) Neewer CTR-16 receivers (1) Godox CT-16 transmitter

The Neewer CTR-16 and Godox CT-16 are cross-compatible 433MHz wireless radio flash triggers that operate on the same core 16-channel manual system.

Compatibility & Working Together

• Frequency: Both operate on the 433MHz radio frequency and feature 16 selectable channels.

• Cross-Brand Use: A Godox CT-16 transmitter can trigger Neewer CTR-16 receivers (and vice versa) as long as both units are tuned to the exact same channel dip switches or dials.

• Manual Only: Neither unit supports TTL (Through-The-Lens automatic flash metering) or High-Speed Sync (HSS); they fire lights strictly in manual power mode.

• Power Requirements:

• Transmitters use a 12V 23A battery (usually pre-installed).

• Receivers (both Neewer and Godox) require two AAA batteries each (not typically included).

Equipment Setup Breakdown

• Transmitters (TX): You only need one transmitter mounted on your camera's hot shoe at a time to broadcast the trigger signal. Having extra transmitters means you have a backup.

• Receivers (RX): You have a total of three receivers combined (2 Neewer CTR-16 + 1 Godox CT-16). You can attach each receiver to a separate speedlite or studio strobe (using the included sync cables/adapters) to trigger up to three off-camera lights simultaneously from a single camera shot.