hahnel Giga T Pro II 2.4GHz Wireless Timer Remote for Nikon Cameras

The hahnel Giga T Pro II 2.4GHz Wireless Timer Remote for Nikon combines the functions of a wireless remote shutter release and a remote timer into a single very useful accessory operating at 2.4GHz. Using the small, lightweight receiver and transmitter (batteries included) you have access to programmable features such as a self timer, interval timer, long exposure setting, and exposure count--all of which may be used in any combination, making the possibilities nearly limitless. There is no limit to the possible number of exposures, and an exposure as long as 99 hours, 59 minutes and 59 seconds can be programmed.

The Giga T Pro II has a Transmitter On/Off button to save battery power. It also has two timing loops, one embedded in the other. This allows you to repeat the original timed program as many times as required. You can also use the original program feature to create a timed 10-minute series of astral shots. You can then set this program to repeat at hourly intervals. In addition, you can set up a basic program which allows you to set up a timed shooting sequence, defining the delay, number of shots, interval shots and so on.

This is a necessary addition to your kit bag for time-lapse or other long exposure photography, including astral photography, wildlife photography and studio photography.

Compatible with Nikon D5000/D700/D300/D300s/D200/D90/D80/D70s/D3s/D3/D3x/D2x/D2xs/D2H/D2Hs/D1/D1x/D1H

The Giga T Pro II is not compatible with the Giga T Pro.

• Channel selector for individual control of multiple cameras
• Interchangeable connectors for different camera models
• Receiver takes a CR2 lithium battery; transmitter takes CR2032 battery. Batteries included.
• Timed sequence fully programmable including self-timer, delay, interval timer, exposure count and exposure length setting
• Shutter release button with autofocus, single & continuous shooting, bulb mode and self timer
• The Giga T Pro II has a Transmitter On/Off button to save battery power.
• It has two timing loops, one embedded in the other. This allows you to repeat the original timed program as many times as required.
• You can use the original program feature to create a timed 10-minute series of astral shots. You can then set this program to repeat at hourly intervals.
• You can set up a basic program which allows you to set up a timed shooting sequence, defining the delay, number of shots, interval shots and so on.
• 100 meter range for wireless control
• Can also be used as cable shutter release
• Through-wall transmission
• LCD display with back lighting
• High-tech, reliable wireless FSK 2.4GHz frequency, license free transmission worldwide

Features

• 100 Meter Range for Wireless Control
• Self-Timer
• Interval Timer
• Exposure Count Setting
• Exposure Length Setting
• Through-Wall Transmission
• Shutter Release Button With Autofocus
• Single & Continuous Shooting
• 2 Timing Loops, One Inside the Other
• LCD Display With Backlighting

Contents

• CR2 Battery