3 Legged Thing
3 Legged Thing
3 Legged Thing
3 Legged Thing
3 Legged Thing
This bronze and blue 3 Legged Thing Tripod Kit includes a bronze Leo 2.0 Tripod and blue AirHed Pro Lever Ball Head. Together, the tripod and ball head form a support system that features three detachable legs and a removable center column. With the ball head, each leg can be configured as a monopod with up to a 43.4" height or can be combined with the center column to form a monopod with up to 59.2" in height.
Tripod heads such as the AirHed Pro Lever Ball Head that are compatible with a 3/8"-16 mount can be connected to the top of the Leo 2.0 Tripod. When combined and configured as a tripod, the Leo 2.0 Tripod and AirHed Pro Lever Ball Head supports up to 66.0 lb and measures 14.7" when folded. Each of the tripod's 5-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. The Leo 2.0 Tripod and AirHed Pro Lever Ball Head can be set at a minimum height of 8.2" when the tripod's 2-section, push-and-pull rapid center column is removed. Together, the three legs can be extended to obtain a maximum height of 44.1" or 57.7" with the center column fully raised along with the ball head. Each of the carbon fiber legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.
For added versatility, the Leo 2.0 Tripod's three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with strap is provided for storage and transport.
The AirHed Pro Lever Ball Head is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by using the clamp's push-and-pull cam lock lever. When opened, the lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever's motion best suits either a right- or left-handed user.
Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the cam lock lever accommodates landscape orientations.
By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.
Arca-type ball head and carbon-fiber tripod with 3/8"-16 mount
Tripod features three detachable legs and removable center column
With ball head, each leg can be configured as a monopod with up to a 43.4" height or can be combined with the center column to form a monopod with up to 59.2" height
Tripod configuration with ball head supports up to 66.0 lb
Push-and-pull center column for rapid camera, lens, or sport optic positioning
Center column D-ring to accommodate ballast for additional stability
Can be set for a minimum height of 21.7" or 8.2" without the center column
With ball head, all three legs can be extended in the tripod configuration to obtain a maximum height of 44.1" or 57.7" with the center column fully raised
Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
Legs each feature 5 sections with twist locks for rapid deployment and can be independently spread
Legs can be locked at 22, 55, or 80° angles
Rubber feet help to enhance stability on a wide variety of surfaces
Weighs 4.1 lb and measures 14.7" when all three legs are reversed 180° and folded
Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil
Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod
3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws
Ball head microfiber bag
Tripod kit carry bag with strap for storage and transport
Arca-type ball head with 88 lb load capacity
Compatible with tripods or support systems that feature a 3/8"-16 mount
Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
Secondary locking knob with knurled surface allows head to rotate 360°
Integrated clamp on top of on the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
Push-and-pull cam lock lever to secure compatible Arca-type quick release plates within the integrated clamp
When opened, cam lock lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever's motion best suits either a right or left-handed user
Built-in bubble level along the edge of the clamp opposite the cam lock lever accommodates landscape orientations
Durable magnesium alloy construction
Compatible with Arca-type quick release clamps
1/4"-20 mount
Dual retaining screws along the underside of the plate prevent the plate from accidentally sliding off the AirHed Pro Lever Ball Head
Durable, aluminum alloy construction
