The Phottix Mitros+ TTL Transceiver Flash features a built-in Odin transmitter and receiver as well as full TTL functionality for use with Sony/Minolta cameras. The Mitros+ has a guide number of 190' at ISO 100 in the 105mm position, useful for illuminating subjects within a zoom range of 24 to 105mm. Additionally, the flash features wireless transmission via an optical pulse or IR triggering and can access 4 channels and 3 groups.
This radio transmission and reception is compatible with Strato II transmitters in addition to full compatibility with the Odin-series wireless devices. Also, this Mitros+ has memory functions for saving up to three sets of flash and function information for quickly changing when needed.
The flash head has the ability to rotate 180° in each direction and tilt from -7° to +90°. This allows for excellent control over bounce angles during a shoot. Also, the Mitros+ features a recycle time from 0.1 to 5 seconds that can be improved to 2.5 seconds with a quick flash mode.
Additionally, this flash unit features full manual controls and customizable shooting options that include high-speed sync and stroboscopic shooting modes. The flash runs on 4 AA batteries and comes with an attachable diffuser for softening light when needed. Other accessories include a soft case, 3.5mm sync cable, USB cable, USB drive with manual, and flash stand. (NOTE: The Sony flashes do not ship with an external power pack adapter, although we have reports that the adapter that ships with the Canon model works just fine on the Sony flash) This model comes equipped with the Sony/Minolta style hot shoe and is not compatible with Sony's Multi-Interface Shoe.
Radio transmission is compatible with Odin and Strato II wireless triggering systems up to 328' away
Wireless functionality via optical pulses in 4 channels and 3 groups with a range of up to 52.5' indoors
Ratio modes from 1:8 to 1:1 and 8:1 are available for firing multiple flash units
A modeling flash setting is available for previewing how your shot will turn out
High-speed synchronization allows you to fire using the fastest shutter speed available on your camera
A bounce card and wide-angle diffuser are built into the flash head for convenience
Stroboscopic mode fires a series of flashes at a frequency of 1-199 Hz for up to 100 flashes
Status LED lights will notify you when the flash is ready to fire
Overheating protection will slow the firing time to avoid damage from heat
AF-assist light for focusing in poor lighting conditions
Memory system for retaining your settings when the flash is powered off
3.5mm sync port for connecting this flash to a larger system